近日,首批依据《光伏组件安全要求》(GB 47739-2026)和《光伏组件铭牌标识要求》(GB 47740-2026)两项强制性国家标准的认证证书正式颁发。全球领先的光储企业晶科能源获得中国质量认证中心、鉴衡认证中心颁发的上述两项强制性国家标准认证证书,成为首批获此双认证的企业。
Recently, the first batch of certification certificates based on the mandatory national standards of "Safety Requirements for Photovoltaic Modules" (GB 47739-2026) and "Identification Requirements for Photovoltaic Module Nameplates" (GB 47740-2026) have been officially issued. Jingke Energy, a globally leading optical storage enterprise, has obtained the two mandatory national standard certification certificates issued by China Quality Certification Center and Jianheng Certification Center, becoming one of the first enterprises to receive these dual certifications.
As one of the first mandatory national standards in the photovoltaic field, the "two strong standards" play an important role in regulating the competitive order of the photovoltaic industry and promoting industrial upgrading and development. The "Safety Requirements for Photovoltaic Modules" stipulate the electrical safety, mechanical safety, fire safety, hazardous substance restrictions, and other requirements for photovoltaic modules, and describe the corresponding testing methods. The "Requirements for Identification of Photovoltaic Module Nameplates" stipulate the basic requirements, identification content, and labeling requirements for electrical performance parameters of photovoltaic module nameplates. This means that component standards have shifted from simply focusing on efficiency and price to emphasizing safety, reliability, and verifiable performance parameters.
The first batch of dual certification is not simply sample testing. The certification adopts a "type test+initial factory inspection+post certification supervision" mode, which not only verifies the safety performance and nameplate parameters of the product, but also verifies the quality assurance ability and batch consistency of the production line. It is a comprehensive inspection of the enterprise's research and development, process, quality and measurement capabilities.
近日,首批依据《光伏组件安全要求》(GB 47739-2026)和《光伏组件铭牌标识要求》(GB 47740-2026)两项强制性国家标准的认证证书正式颁发。全球领先的光储企业晶科能源获得中国质量认证中心、鉴衡认证中心颁发的上述两项强制性国家标准认证证书,成为首批获此双认证的企业。
作为光伏领域首批强制性国家标准,“两项强标”对规范光伏行业竞争秩序、推动产业升级发展起到重要作用。《光伏组件安全要求》规定了光伏组件的电气安全、机械安全、防火安全、有害物质限制等要求,并描述了相应的试验方法。《光伏组件铭牌标识要求》规定了光伏组件铭牌的基本要求、标识内容和电性能参数的标注要求。这意味着,组件标准从单纯的效率与价格,转向安全、可靠与真实性能参数的可验证并重。
首批双认证并非简单送样测试,认证采用“型式试验+初始工厂检查+获证后监督”模式,既验证产品安全性能与铭牌参数,也核查产线质量保证能力和批量一致性,是对企业研发、工艺、质量与计量能力的综合检验。
The advantages of JinkoSolar are reflected in the pre standardization and system support. Jingke participated in the drafting of two strong standards, promoting the earlier integration of standard requirements into product definition and production line control. In terms of quality system, JinkoSolar's production base has passed the quality management system certification, and multiple component companies have passed the photovoltaic module manufacturing quality system certification, covering the entire process from raw materials to finished product delivery, providing a system guarantee for factory inspection and post certification supervision.
At the product level, the Feihu series products, including Feihu 3, have mature capabilities in terms of safety and realistic parameters. On the safety side, Feihu 3 has been fully validated in terms of fire prevention, mechanical load, hail resistance, and control of harmful substances, with key safety indicators meeting the requirements of strong standards. On the nameplate end, the efficiency, power, temperature coefficient, and attenuation performance of the Flying Tiger 3 have a verifiable and traceable measured basis, which can meet the requirements of strong standards for parameter authenticity and consistency.
This first batch of dual certifications confirms JinkoSolar's full chain compliance capabilities from standard participation, product design to mass production quality control. In the future, JinkoSolar will continue to adhere to strong standard requirements, integrating safety and authenticity throughout the entire process of research and development, manufacturing, and delivery, providing reliable product support for the standardization upgrade and high-quality development of the photovoltaic industry.
晶科能源的优势体现在标准前置与体系支撑。晶科参与了两项强标的起草工作,推动标准要求更早融入产品定义与产线管控。质量体系方面,晶科能源投产基地均通过质量管理体系认证,多家组件公司通过光伏组件制造质量体系认证,覆盖原材料到成品交付全过程,为工厂检查和获证后监督提供体系保障。
产品层面,包括飞虎3在内的飞虎系列产品在安全与真实参数上具备成熟能力。安全端,飞虎3在防火、机械载荷、抗冰雹及有害物质控制等方面形成完整验证,关键安全指标达到强标要求。铭牌端,飞虎3的效率、功率、温度系数及衰减表现具备可验证、可追溯的实测基础,能够满足强标对参数真实性与一致性的要求。
此次首批双认证,印证了晶科能源从标准参与、产品设计到量产质控的全链条合规能力。未来,晶科能源将继续践行强标要求,把安全与真实贯穿研发、制造与交付全流程,为光伏行业标准化升级与高质量发展提供可靠产品支撑。
(Using AI translation)
(使用AI翻译)